| 7840 Moen Sink Faucet |
|
|
1 handle kitchen sink faucet with matching Protege side spray. 8-7/8-in spout height. 10-in swing spout reach. For 2 or 4 hole applications. Hydrolock quick connect installation. Available in chrome, stainless, or oil rubbed bronze
Manufacturer: Moen Faucets
Part Number: 7840 |
|
$0.00 |
|
| |
| A Y MCDONALD SERVICE FITTING |
|
|
WE CARRY A VARIETY OF SERVICE FITTING IN BOTH IPS AND CTS SIZES. NFS AND ANSI CERTIFIED.
Manufacturer: A Y McDonald Valves
Part Number: 4758-22-007 |
|
$0.00 |
|
| |
| TWO IN ONE RING SHOWER HEAD AND HANDHELD |
|
|
* TWO IN ONE RING SHOWER
* Two Showers in One
* Full spray shower head with detachable 4 spray hand shower
* Double Check Valve
* The hand shower simply slips into position, and is easily removed.
* In2ition features an integral three-way diverter with easy -turn lever redirecting water from the fixed shower head to the hand held, or both at the same time.
* Spray Settings: Full Spray, Fast Massage, Full Spray with Massage, and Tickle
* UltraFlex 60" Hose (490) Included
Manufacturer: Alsons
Part Number: 6465cpk |
|
$0.00 |
|
| |
| VICTORIAN FAUCET |
|
|
DELTA AGED PEWTER VICTORIAN SINGLE HANDL LAV FAUCET. 1 OR 3 HOLE 4CC INSTALLATION. THIS FAUCET HAS METAL HANDLE, METAL POP-UP DRAIN, 1/2IN IPS CONNECTIONS AND OPTIONAL 6-1/8 ESCUTCHEON.
CAN BE USED ON UP TO 2-1/4 DECK THICKNESS.
1.5-GPM WATER FLOW.
Manufacturer: Delta Faucet
Part Number: 554-PT |
|
$0.00 |
|
| |
| BRADFORD WHITE DEFENDER WATER HEATERS |
|
|
Standard Energy Saver features
Advanced ScreenLok® Technology Flame Arrestor design
Resettable thermal switch
Piezo ingiter
Maintenance free
Pedestal base
Sight window
Fully automatic controls
actory installed Hydrojet® Total Performance System
Vitraglas® lining
¾" NPT factory installed dielectric waterway fittings
Protective magnesium anode rod
"3" x "4" Snap-Lock draft diverter on 40,000 BTU/Hr. or less models
T&P relief valve included
Brass drain valve
1" Non-CFC foam insulation
Manufacturer: Bradford White Heaters
Part Number: MI40T6FBN |
|
$0.00 |
|
| |
| QUICK JON ULTIMA SEWAGE REMOVAL SYSTEM |
|
|
Install a Qwik Jon® Just About anywhere
Designed to accommodate a toilet, lavatory and a bathtub/shower
1.6 Gallon residential flush
Perfect for basements, cabins, workshops, garages, additions, pool houses, etc.
No need to destroy concrete floors
1" discharge (can be reduced to 3/4" to replace existing system)
Reduces construction cost
Pumps any direction
Fits just about anywhere
Manufacturer: Zoeller Pump Company
Part Number: |
|
$0.00 |
|
| |
| LENOX T2 SAW BLADES |
|
|
LENOX® innovation delivers the longest lasting blades at the lowest cost per cut. There is a blade optimized for every cutting application including our high performance Titanium coated LENOX® Gold™ and LENOX® Diamond™ blades
Manufacturer: Lenox Saw Blades
Part Number: |
|
$0.00 |
|
| |
| SLOAN REGAL FLUSH VALVE |
|
|
Quiet, Exposed, Diaphragm Type, Chrome Plated Urinal Flushometer with the following features:
• ADA Compliant Metal Oscillating Non-Hold-Open Handle
• ¾” I.P.S. Screwdriver Bak-Chek™ Angle Stop
• Vandal Resistant Stop Cap
• Adjustable Tailpiece
• Vacuum Breaker Flush Connection
• Spud Coupling, Wall and Spud Flange for ¾” Top Spud
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Non-Hold-Open Handle and No External Volume Adjustment to Ensure
Water Conservation
• Low Consumption flush accuracy controlled by Para-Flo™ Technology
• Handle Packing, Stop Seat and Vacuum Breaker to be Molded from
PERMEX™ Rubber Compound for Chloramine Resistance
Manufacturer: Sloan Valve
Part Number: |
|
$0.00 |
|
| |
| LEGEND BALL VALVE |
|
|
The Best Valves in the Industry.
Every valve is designed to meet your demanding needs, and then manufactured from the finest raw materials using ISO-9002 or equivalent standards. You don’t have to take our word for it, either: Legend Valves are backed by the highest independent industry certifications in their respective categories.
Manufacturer: Legend Valve
Part Number: |
|
$0.00 |
|
| |
|
|
| |
| MYSTIC MARTINI SINK |
|
|
Installation Type: Undermount
Material: Stainless Steel
Thickness: 18 Gauge
Sound Deadening: SoundGuard®
Number of Bowls: 1
Minimum Cabinet Size: 27"
Sink Dimensions: L: 22" W: 20 1/2"
Primary Bowl Depth: 5 1/2"
Center Bowl Dim.: 19 1/2'' x 18'' x 5 1/2''
Faucet Holes: 0
Drain Size: 2"
Shipping Weight: 15.3 lbs
Manufacturer: Elkay Sinks
Part Number: |
|
$0.00 |
|
| |
| KOHLER CIMARRON 1.28GPF TOILET |
|
|
Cimarron® Comfort Height™ elongated 1.28 gpf toilet with Class Six™ technology and left-hand trip lever, less seat
Featuring the new Class Six flushing technology, the redesigned Cimarron Comfort Height elongated toilet delivers outstanding bulk flushing and best-in-class bowl cleanliness. The Cimarron two-piece toilet's easy curves complement a variety of bathroom environments. This 1.28 gpf model provides significant water savings without sacrificing performance. •Qualifies as an HET (High-Efficient Toilet) - consumer rebates are available in certain municipalities
•29-3/8"L x 17-3/5"W x 30-3/4"H
•Class Six flushing technology provides tremendous bulk waste flushing performance and best-in-class bowl cleanliness
•With a seat height comparable to that of a standard chair, KOHLER Comfort Height™ toilets make sitting down and standing up easier for people of all ages
•Canister flush valve provides smooth flushing actuation with consistent water usage, flush after flush
•DryLock™ attachment plate reduces installation time by 40%, as well as prevents potential leak points during the installation and throughout the life of the product
•Elongated bowl
•Meets strict flushing performance guidelines established by the EPA's (Environmental Protection Agency) WaterSense program
•1.28 gpf provides significant water savings of up to 3,200 gallons per year without sacrificing performance
•12" rough-in
Manufacturer: Kohler Co.
Part Number: K3609 |
|
$0.00 |
|
| |
| 380SLOW CLOSE SEAT |
|
|
Seats shall be No. 380SLOW as manufactured by Church Seats. Seats shall be heavy weight and injection molded of solid plastic. Seats shall be closed front with cover for elongated bowl and feature large molded-in bumpers. Color matched hinges contain stainless steel pintles, noncorrosive
top-tightening bolts, wing nuts and no-slip washers. Easy•2TM hinge eliminates slamming and pinched fingers and lifts off for easy cleaning.
Manufacturer: Church Toilet Seats
Part Number: 380SLOW |
|
$0.00 |
|
| |
| EVOLUTION EXCEL DISPOSAL |
|
|
Evolution Excel™
The Evolution Excel™ features the best of InSinkErator's grinding and SoundSeal Plus™ noise-reduction technologies, handling more volume and more types of food waste while making 60% less noise than standard disposers. See and hear the Excel®.
Our powerful food waste disposers are the right choice when replacing an existing unit or designing a brand-new kitchen. You can choose between five Evolution models, including Evolution Septic Assist™, designed specifically for homes with septic systems.
With an InSinkErator® food waste disposer in your kitchen, chicken bones, fruit rinds, coffee grounds and more can go right in the sink -- where they're virtually liquefied to safely flow into your sewage system or septic tank. You'll enjoy a cleaner food preparation area, and less bagged garbage cluttering your home.
What's more, if you've never owned a food waste disposer, you're in for a pleasant surprise. InSinkErator® disposers are economical to operate: in fact, they're among the least expensive installed kitchen appliances.
Manufacturer: Insinkserator Disposals
Part Number: PROXL |
|
$0.00 |
|
| |
| TUF-TITE DISTRIBUTION BOX |
|
|
Injection molded HDPE Distribution box accepts Tuf-Tite's Box Fittings and Speed-Levelers™
7HD2 7-Hole Distribution Box. Comes complete with a lid and your choice of 9 fittings.
Lid is 16" x 16";
Box is 14-1/2" tall;
There is a 2" drop between inlet and outlets.
Manufacturer: Tuf-Tite Drainage & Septic Products
Part Number: 7HD2 |
|
$0.00 |
|
| |
| INFILTRATOR CHAMBER |
|
|
The evolutionary patent-pending Quick4® Standard Chamber fits in a 36" wide trench and is ideal for curved or straight systems. It features the patent-pending Contour Swivel Connection™ which permits 10-degree turns, right or left. The MultiPort™ end cap allows multiple piping options and eliminates pipe fittings. The chamber’sfour-foot length provides optimal installation flexibility.
Manufacturer: Infiltrator systems
Part Number: Q4STD |
|
$0.00 |
|
| |
| BASCO CLESTA SHOWER DOOR |
|
|
Door Pull Acrylic, Contemporary, Traditional
Glass Thickness 1/2", 3/8"
Hinge Cologne, Geneva, Pinnacle, Pivot, Prima, Vienna
Knob Contemporary Back to Back, Contemporary Single Side, Traditional Back to Back, Traditional Single Side
Towel Bar Circular Pull, Clear Acrylic Pull, Clear Acrylic Single Side, Through the Glass, Traditional Pull, Tubular Brass Single Side
Manufacturer: Basco Shower Door
Part Number: CLESTA LX950 |
|
$0.00 |
|
| |
| PHCC2400 |
|
|
When the power goes out or the main sump pump fails, be protected with a PHCC Pro Series battery backup sump pump system.
3 backup sump pump systems to choose from
all 3 backup sump pump systems monitor the battery, power and pump conditions
system will alert the homeowner when maintenance is needed
Manufacturer: Glentronics Corp
Part Number: PHCC2400 |
|
$0.00 |
|
| |
| LAING PUMP |
|
|
The pump is installed under the sink or faucet farthest from the water heater -- where hot water usually takes the longest amount of time to arrive.
A built-in temperature sensor automatically turns the pump on when the water temperature in the hot water supply line cools down to 85º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater.
The pump turns off automatically when the hot water supply line to the faucet reaches 95º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line.
Hot water will also be instantly available at all other faucets in the supply line between the water heater and the faucet where the pump is installed
Manufacturer: Laing, Inc. (Pumps & Heaters)
Part Number: |
|
$0.00 |
|
| |
| CHICAGO LAV FAUCET |
|
|
FEATURES & SPECIFICATIONS
• Polished chrome plated finish
• Solid brass body construction
• 8" Rigid valve body centers
• 5 1⁄4" C-C Rigid/Swing field convertible gooseneck
spout, catalog #GN2B
• 2.2 GPM (8.3 L/min) pressure compensating
multi-stream spray aerator outlet, catalog #E4
• 4" Wristblade metal handles with eight point broach and
secured color coded index buttons, catalog #317
• Quaturn™ quarter-turn renewable compression
cartridge that closes with water pressure with tapered
square broach to facilitate handle removal, catalog
#377-XTLH and #377-XTRH
• 1⁄2" NPSM supply inlets with coupling nuts for 3/8" or
1⁄ 2" flexible risers
• Mounting hardware included
PERFORMANCE SPECIFICATION
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140° F
Manufacturer: Chicago Faucet Co
Part Number: 786-CP |
|
$0.00 |
|
| |
| SWAN SINK |
|
|
Innovative raised platform with decorative channels is ideal for food prep, dishwashing and cleanup.
All the space of a larger single basin plus a smaller bowl for fast filling and water conservation.
Made with 80% quartz stone-only a diamond is harder.
Virtually indestructable-will not damage from kitchen use.
Standard sink size.
Ideal for remodeling or new construction.
Offers design flexibility-installs as a drop-in or undermount.
10" (254mm) deep bowl
6" (153mm) deep bowl
Manufacturer: Swan Plumbing Products
Part Number: QZAD-3322 |
|
$0.00 |
|
| |
| PRE-RINSE SPRAY FAUCET |
|
|
T&S Brass B-0133 pre-rinse spray faucet 8-in on center wall mounted
· B-0107-C low flow spray valve (1.24 gpm)
· 8" (203mm) center wall mounted faucet (002832-40) with "pop and lock" riser installation feature
· B-0109-01 6" (152mm) wall bracket
· 35-1/2" (902mm) high
· 15" (381mm) overhang
· 1/2" NPT female eccentric flanged inlets (00AA)
· 18" (457mm) riser (000369-40)
· B-0044-H flexible stainless steel hose
· EPAct 2005 Compliant
add a faucet with spout available as an option on this unit
Manufacturer: T&S Brass
Part Number: B-0133 |
|
$0.00 |
|
| |
| ALLERTON PEDESTAL LAV |
|
|
Square front pedestal leg
Elegant wash basin with generous deck space
Concealed front overflow
4" Centers
Screen colors of the vitreous china should only be used as a reference. Contact your local Gerber representative to obtain a China Color Chart or visit a showroom to see the actual china chips
--------------------------------------------------------------------------------
Specifications
Width 21 1/2"
Depth 18 3/4"
Height 33 5/8"
Manufacturer: Gerber Plumbing Products
Part Number: 22-565 |
|
$0.00 |
|
| |
| HALSEY TAULOR COOLERS |
|
|
Self-contained, electric refrigerated wall-mounted bi-level water cooler with softly rounded corners and edges, designed to be easily accessible to physically challenged individuals. When properly installed, unit meets state and federal requirements as defined by the Americans with
Disabilities Act for both children or adults.
Unit is certified to NSF/ANSI 61 and meets
requirements of the Safe Drinking Water Act.
Unit provides 50° F water at 80° F inlet water
Manufacturer: Halsey Taylor Water Coolers
Part Number: HTV8-BL |
|
$0.00 |
|
| |
| PRESBY SYSTEM |
|
|
Requires much less area lasts longer costs less and requires no stone installs more quickly
treats effluent more efficiently and completely
adjusts easily to difficult sites and slopes
complements natural environmental processes
uses recycled plastics
Manufacturer: PRESBY ENVIRONMENTAL
Part Number: P1201-010 |
|
$0.00 |
|
| |
